Vehicle Backup System Installation Service near me

Best Vehicle Backup System Installation Service and Cost In Albuquerque
MOBILE MECHANICS OF ALBUQUERQUE

Vehicle Backup System Installation service near Albuquerque IA: Are you looking for Vehicle Backup System Installation service near Albuquerque IA? MOBILE MECHANICS OF ALBUQUERQUE, Backup System are now readily available as aftermarket parts that anybody can install on older vehicles .Cost? Free estimates! Send us a message or call us today. Best Towing Service around Albuquerque IA. Albuquerque IA Vehicle Backup System Installation Service specializes you with fast service, so you don’t have to wait for long. We serve Albuquerque IA and other areas. Get a Free Quote Now!

VEHICLE BACKUP SYSTEM INSTALLATION SERVICE IN IOWA CITY IA

IOWA CITY VEHICLE BACKUP SYSTEM INSTALLATION

Vehicle Backup System Installation

Vehicle Backup System Installation service near Albuquerque IA: So you want to install a backup system on your trusty, but outdated, ride. Great idea! These helpful tools have made such an impact on the automotive industry that they’re now mandated as necessary safety features. But dealership rides aren’t the only way to get back up cameras.

Backup cameras are now readily available as aftermarket parts that anybody can install on older vehicles. MOBILE MECHANICS OF ALBUQUERQUE, On brand-new vehicles, a backup camera comes fully integrated into the electronics, so the system’s components are hidden. That’s the goal when installing a custom aftermarket setup, as well.

With a few tweaks to the car’s rear and a couple of wire connections, you’ll never have to crane your neck backward to check if little Timmy is practicing Big Wheel donuts at the end of the driveway. The MOBILE MECHANICS OF ALBUQUERQUE’s crack How-To team is here to help walk you through the process.

What Is a Backup System?

A backup camera, when built into a car’s systems by the manufacturer, displays a small, live view from behind the car when the vehicle is put into reverse. This gives the driver a clearer picture of what’s behind him or her and helps to ensure Fido doesn’t get a deep-tissue massage from your tires.

Here is a list of the types of cameras, as well as the types of displays commonly used.

Types of Cameras

  • Bracket-mounted: The camera is attached to but separated from a bracket that can be mounted on the car’s surface.
  • Flush-mounted: A camera that is made to blend with the surface of the vehicle as much as possible.
  • License plate frame: The camera is embedded within a license plate frame.
  • License plate bar: The camera is centered in a bar that stretches across and attaches to the top of a license plate.
  • OEM-specific: If you have a newer used car, it might be compatible with a specific part, such as a latch handle, that has a camera built in for a clean factory look.

Types of Displays

  • Integrated OEM: A factory unit that comes with the car and sits in or on top of the dashboard.
  • In-dash aftermarket: An added infotainment stereo with a screen that fits flush with the dashboard
  • On-dash aftermarket: A stand-alone monitor that can be placed on top of the dashboard.
  • Rearview mirror: A monitor is built into the rearview mirror. Sometimes the screen is half of the mirror, sometimes it is full-length. When not in use, it just looks like a mirror.
  • Wired vs. Wireless: Wired backup cameras require a physical wire connection to get the video from the camera to show up on the display. Wireless options, however, use a signal and receiver method and do not require a wire.

Buying a Backup Camera System

Vehicle Backup System Installation service near Albuquerque IA: Many car audio and electronic businesses, as well as some of the big box electronic stores, sell and install backup camera systems.

People can buy back up cameras as an aftermarket device by installing a small camera on the back bumper or license-plate holder. A video recorder, meanwhile, can be installed in a replacement rear-view mirror, on a screen that mounts to your car’s dashboard or can be integrated into a video screen that already exists on the vehicle.

Everything You’ll Need to Install a Backup System

We’re not psychic, nor are we snooping through your toolbox or garage, so here’s what you’ll need to get the job done.

Tool List

  • Flathead screwdriver
  • Phillips screwdriver
  • Trim/panel removal tools
  • Wire strippers
  • Cordless drill
  • 3/32 to ⅛ drill bit
  • Automotive Multimeter
  • Wire connectors such as Posi-Taps
  • Electrical tape
  • Zip ties
  • A friend

Parts List

  • Rearview camera
  • Wire cluster
  • Monitor or infotainment unit (if necessary)
  • Rubber grommet

How to Install a Backup System

Let’s do this!

Adding the Camera

  • Make sure the vehicle is turned off.
  • Safely disconnect the vehicle’s battery terminals.
  • Remove the license plate if necessary.
  • Position the camera to the desired position on the vehicle.
  • With a marker, mark where the camera’s cord hits the vehicle.
  • Depending on the type of vehicle and where the camera will be located, you will likely need to remove an interior panel from the interior portion of the door, hatch, or tailgate. On a bumper, this might not be necessary.
  • Make sure there are no wires, cables, or trim pieces that could be damaged when you drill a hole through the exterior of the car.
  • Determine which size drill bit bores a large enough hole to accommodate the camera’s wire and rubber grommet. A simple visual inspection is usually all you need.
  • Using the selected drill bit, drill a hole where you made a mark.
  • Add a rubber grommet into the hole to hide the rough metal edges and protect the wire.
  • Run the camera wiring through the hole.
  • Attach the camera to the vehicle either through the supplied hardware or the hardware you purchased separately.

Begin Wiring Installation

  • Connect the provided wire cluster to the camera wire. This will split into a video wire, a power wire, and possibly a reverse signal wire.
  • For the cleanest look, look for the existing manufacturer wiring loom, and try to pair and route the wiring next to that.
  • Identify a power source for the camera, likely either a reverse light or a license plate light.
  • Identify the positive and negative wires from the light source using a multimeter.
  • Link the positive camera wire to the positive light wire and the negative camera wire to the negative. This can be done with a splice or a Posi-Tap connector.

Splicing a Wire

  • If Posi-Taps are not available, then you will need to splice your wires together. For ease, we recommend a military splice, as it does not require soldering.
  • Using a wire stripper, hold the positive light wire and remove a section of the plastic coating to reveal the copper.
  • Split the exposed section of copper into two.
  • Feed the positive camera wire through the hole between the copper wiring.
  • Wrap and twist the wiring positive camera wire around the light wire to establish a sturdy connection.
  • Shrinkwrap and/or tape up the connection for security and protection.
  • Repeat for the negative wire.

Reverse Signal Wire

In order for the display to show the video feed, it needs a signal to alert the system the car is in reverse. In some cases, the infotainment unit will have automatic signal sensing that detects the presence of an incoming video signal. If this is the case, skip this step.

  • Using a friend, identify a signal source this is any wire that holds a positive 12 volts while the car is in reverse. People often use the wiring for the reverse light, but some aftermarket stereo wiring harnesses have a connection built in.
  • Tap into the signal source with a splice (repeat steps above).
  • Pair the signal wire with the video wire and prepare for routing.

Routing the Wiring

  • Depending on the type of vehicle, determine whether you want to track the wire under the floor of the vehicle or through its headliner.
  • Remove or partially detach any trim pieces, carpeting, headliner, or door rubber needed to discreetly run the wire.
  • Tuck the two wires out of view, and run them to the front of the vehicle.
  • Reattach the trim pieces you’ve removed.

Connecting the Display

Once the monitor is in place, be that in the dashboard, on top of it, or in the rearview mirror, it’s time to connect it to power, video, and the signal wire.

In some cases, the monitor power cord can be linked straight into the fuse box with a spliced-on adapter.

  • Use a multimeter to determine an appropriate spot and attach the power cable.
  • Make sure the fuse turns off when the ignition is off, or the connection could drain the battery.

In other cases, the power wiring can be hooked into the existing stereo unit.

  • Remove the trim piece to reach the stereo wiring.
  • Find the power cables for the stereo.
  • Connect positive to positive and negative to negative.
  • Connect the reverse signal wire to the reverse trigger wire.
  • Connect the video wire.
  • Reattach the trim pieces you’ve removed.

Wrapping Up

  • Safely reconnect the battery terminals.
  • Start the car.
  • Put the car in reverse to see if the monitor switches or turns on and displays the rear video feed.
  • If it works, turn the car off. If it doesn’t, return to the steps and check your work.
  • Tidy up any superfluous wire with electrical tape, zip ties, and velcro.
  • Reinstall the stereo head unit, if necessary.
  • Reinstall any removed interior parts, panels, or coverings.

TIPS

Vehicle Backup System Installation service near Albuquerque IA:

  • Pulling stubborn tangled wire throughout a car can be frustrating, so it’s best to be prepared with tools that can make the process easier. Use a wire feeder or puller to get those wires through tough spots.
  • Commercial Camera extensions should not exceed 100 feet. If experiencing signal loss with a standard definition cable (TE-CEX), upgrade to a high definition cable (TE-HEX). The TE-HEX cables have a thicker copper cabling that helps with the signal loss and allows for the distribution of high definition signal.
  • If after a camera is installed you experience a rolling line, check your ground. The most common cause of this would be the grounding of the camera itself. The second cause would be a loose or broken ground in the RCA itself; this would require a replacement of the camera.
  • If after a camera is installed you experience a black and white image, check your ground. Check the ground on the monitor and the camera. A bad ground will not allow the processor to turn on fully, which results in a black and white image.

COST

How much does it cost to get a backup system installed?

Vehicle Backup System Installation service near Albuquerque IA: Count on $400-$600 for labor. If your car doesn’t have a screen, there’s additional cost, of course: $150-$200 for a screen alone and $500-$1,500 for new head unit with a screen.

How much is a backup camera installation?

Count on $400-$600 for labor. If your car doesn’t have a screen, there’s additional cost, of course: $150-$200 for a screen alone and $500-$1,500 for new head unit with a screen. Back-up camera systems come in three basic types: Camera-only systems that can be added to a car that already has a stock in-dash screen.

How Much Do Backup Cameras Cost?

  • The first involves installing a 3.5-inch portable screen and backup camera for around $350, including installation.
  • The next involves replacing the old rearview mirror with a new one with a video screen for about $450 to $800. This option can run more expensive, for example, if you’re replacing a rear view mirror with OnStar capabilities. Taking a rearview mirror with OnStar down will deactivate the technology and cause the engine light to illuminate.
  • If you already have a screen in your car, technicians can integrate a new backup camera into the existing video monitor for about $500 to $1,000.
  • The final option entails installing a new video screen on a vehicle that has a standard radio. This can cost $700 to $3,000, depending on all the options available such as navigation technology. The cost of a backup camera system can increase by adding technology, such as a backup sensor, which beeps when something is behind the car.

FREQUENTLY ASKED QUESTIONS

Will installing a backup camera system void my vehicles warranty?

No, installing a backup camera system or any aftermarket accessory or device will not void your vehicle’s factory warranty. In fact, it is illegal for a car dealer to deny warranty coverage because you have installed a backup camera system or any aftermarket accessory or device.  The Federal Trade Commission, the nation’s consumer protection, has issued a bulletin that explains your protections under the law (The Magnuson-Moss Warranty Act) and legal rights. Click here to view FTC Bulletin

Will your backup camera systems work on my vehicle?

Yes, Our Premium Backup Camera System will work on any Car, Minivan, SUV, Pickup Truck or Commercial Vehicle.

Can I buy your systems without installation?

Yes, all of their products are available without installation.  In fact, Online purchases qualify for FREE Nationwide Ground Shipping

Can I install the backup camera system myself?

Although we recommend professional installation, our products can be installed by the DIY’er with a basic knowledge of automotive 12V systems and the right tools (12V tester is a must)!  Click Here For Installation Instructions

How long will installation take?

Professional Installation by Backup4safety.com of a backup camera system will typically take 2 – 3 hours (complex installations can take longer) and can be performed at your home or office for maximum convenience.

Do you warranty your installation?

Yes, Backup4safety.com stands behind our installation services and will correct any problem directly relating to the product installation, for the product’s warranty period.

Why do I need a Backup camera module?

Backup camera module allows you to add a rear view camera the built in screen that came with your vehicle

Do I get a warranty for the Backup camera module?

The warranty on our modules are the same high quality 1 year warranty we provide on all of our products.

CALL US FOR:

  • Vehicle Backup System Installation Service Near Albuquerque IA
  • Backup Camera Installation Service
  • Backup Camera Installation
  • Car Backup Camera Installation Service
  • How Much Does It Cost To Install A Rear View Camera On A Car
  • Toyota Backup Camera Installation Cost
  • Reverse Camera Installation Price
  • Who Installs Backup Cameras
  • Car Backup Camera Installation Near Albuquerque IA
  • Backup Camera Installation Service
  • Car Backup Camera Installation Service
  • How Much Does It Cost To Install A Rear View Camera
  • Toyota Backup Camera Installation Cost
  • Backup Camera Installation
  • Who Installs Backup Cameras
  • Car Backup Camera Installation
  • Does Install Backup Cameras Near Albuquerque IA

Service Area

  • Coralville Vehicle Backup System Installation Service near me
  • Hills Vehicle Backup System Installation Service near me
  • Albuquerque Vehicle Backup System Installation Service near me
  • Johnson County Vehicle Backup System Installation Service near me
  • Kalona Vehicle Backup System Installation Service near me
  • Lone Tree Vehicle Backup System Installation Service near me
  • North Liberty Vehicle Backup System Installation Service near me
  • Oxford Vehicle Backup System Installation Service near me
  • Riverside Vehicle Backup System Installation Service near me
  • Solon Vehicle Backup System Installation Service near me
  • Swisher Vehicle Backup System Installation Service near me
  • Tiffin Vehicle Backup System Installation Service near me
  • University Heights Vehicle Backup System Installation Service near me
  • West Branch Vehicle Backup System Installation Service near me
  • West Liberty Vehicle Backup System Installation Service near me

BEST VEHICLE BACKUP SYSTEM INSTALLATION SERVIC IN IOWA CITY

MOBILE MECHANICS OF ALBUQUERQUE

REQUEST MORE INFORMATION. CONTACT US NOW!

Message Us
close slider
[ninja_form id=3]